Best Electrical Engineering Master’s Programs in Connecticut
An accepted research paper is part of UConn's electrical MS thesis route. Plan A students must have a full conference-proceedings paper accepted by graduation, with a journal paper allowed as a substitute. That requirement makes publication planning and faculty supervision central to the research degree, alongside the thesis and its oral presentation.
Our 2026 selection of electrical engineering master’s programs in Connecticut reviews UConn's in-person MS at Storrs. The alternative Plan B emphasizes graduate coursework and finishes with a comprehensive examination. Both routes can support a concentration in electronics, photonics and biophotonics or in information, communication, decision and energy systems, with an advisory committee helping determine the appropriate academic plan.
Electrical Engineering master’s rankings by state+
Jump to a program +
Inside this ranking
How we ranked electrical engineering master’s programs in Connecticut
The Connecticut collection reviews UConn's MS in Electrical Engineering through its current graduate catalog. The assessment follows the Storrs degree's research and coursework plans, optional concentration requirements and traditional graduate tuition schedule. University-wide admission requirements are identified as a baseline alongside the department's electrical preparation expectations.
UConn is selected for distinct finishing requirements and clearly documented concentration coursework. The assessment weighs the research publication obligation, comprehensive examination and advisory committee's role in planning study. It also uses the applicable Storrs graduate tuition and mandatory fees when explaining the financial commitment.
$9,756 · Resident tuition per semester at 9+ credits
Cost basis & conditions +
For standard graduate enrollment of nine or more credits, UConn lists tuition of $9,756 for residents and $20,712 for nonresidents per semester. With the listed Storrs mandatory fees, semester subtotals are $11,699 and $22,655. Living costs and individually applicable charges are additional; this is separate from fee-based MEng pricing.
UConn's electrical MS makes its research route more demanding than a thesis submission alone. Plan A requires an accepted full conference-proceedings paper by graduation, with a journal article allowed as a substitute, as well as the thesis and oral presentation. Plan B instead culminates in a comprehensive examination based on core coursework. Students can pursue electronics, photonics and biophotonics or information, communication, decision and energy systems, with concentration requirements that shape the advanced course plan. The reviewed award is the in-person MS at Storrs.
Where it stands out
UConn suits an applicant who wants the finishing requirement to match a clear research or technical-study objective. The publication expectation provides a concrete reason to investigate faculty supervision early, while Plan B offers an examination-based route for students concentrating on advanced graduate coursework.
What to weigh
The thesis route's publication requirement introduces work and timing beyond simply completing scheduled classes. Concentration and independent-study rules also differ, so the advisory committee's approved plan matters. Budget the Storrs MS using the traditional graduate tuition schedule and mandatory fees, keeping the separate fee-based MEng price attached to that different degree.
The MS requires at least 30 semester credits. Plan A includes at least 21 coursework credits and nine thesis-research credits, plus its required seminar participation.
Plan A requires an accepted full conference-proceedings paper by graduation; a journal paper can substitute. The thesis also requires an oral presentation.
Plan B requires at least 30 graduate credits, limits independent study to six credits and includes a comprehensive examination based on core coursework. Full-time campus students take the one-credit ECE 6094 seminar.
Areas of focus
Electronics, photonics and biophotonics
Information, communication, decision and energy systems
Admission & progression
The department expects a strong undergraduate technical background in basic electrical and computer engineering.
Graduate School GPA eligibility can be met through a 3.0 degree GPA, a 3.0 GPA over the most recent two full-time undergraduate years, or another specified qualifying pathway.
Applicants submit required academic transcripts and applicable international credential or language evidence. The student and advisory committee determine the research or coursework plan.
Research & project requirements
Plan A combines supervised thesis research, an oral thesis presentation and a publication-acceptance requirement.
The electronics, photonics and biophotonics concentration spans electromagnetics/photonics, semiconductor/optoelectronic devices and applications.
The information, communication, decision and energy systems concentration specifies system theory, stochastic processes, digital signal processing, communications and estimation coursework.
What matters in electrical engineering master’s programs in Connecticut
Publication within the thesis route
Plan A requires an accepted research paper as well as the thesis and oral presentation.
Concentration-specific preparation
Each technical concentration imposes its own distribution or required courses.
The correct graduate billing category
The Storrs MS uses traditional graduate tuition and mandatory fees, with residency affecting the published charge.
The research finish in UConn’s electrical MS
The UConn catalog gives Plan A a minimum thirty-credit structure, including at least twenty-one coursework credits and nine thesis-research credits. It also requires the one-credit ECE 6094 seminar, a satisfactory thesis and an oral presentation. The accepted full conference paper or journal substitute belongs in the completion plan from the beginning, because writing, submission and review require coordination with the research advisor.
Plan A's independent-study allowance depends on the concentration. Electronics, photonics and biophotonics students may include up to six ECE 6099 credits, while information, communication, decision and energy systems students may include up to three. The catalog notes that some students need more than seven courses and leaves the final plan to the student and advisory committee. Use those rules to discuss the balance between advanced classes, supervised investigation and the intended thesis topic.
Coursework and concentrations in Connecticut’s reviewed electrical MS
Plan B requires at least thirty graduate credits and a comprehensive examination based on core coursework. Independent study is limited to six credits, and full-time campus students take the one-credit seminar. A student choosing this route should prepare for a formal examination rather than assume that passing individual classes completes every requirement. The committee-approved course plan determines the technical foundation on which that examination is based.
The electronics, photonics and biophotonics concentration requires a course in each of three areas: electromagnetics or photonics, semiconductor or optoelectronic devices, and applications. The information, communication, decision and energy systems concentration specifies courses in system theory, stochastic processes, digital signal processing, communications and estimation. These requirements give applicants a concrete way to compare a device-oriented plan with a systems-oriented one before selecting graduate electives.
UConn graduate preparation and the Storrs MS budget
The department expects a strong undergraduate foundation in electrical and computer engineering. The Graduate School provides several GPA eligibility pathways, including a 3.0 overall degree GPA or a 3.0 GPA over the most recent two years of full-time undergraduate coursework. Applicants must submit the required academic documentation and any applicable language or international credential evidence. Meeting the university baseline does not replace the need for preparation matched to the intended electrical concentration.
For 2026–27 enrollment of nine or more credits, standard graduate tuition is $9,756 per semester for residents and $20,712 for nonresidents. The listed Storrs mandatory fees bring semester subtotals to $11,699 and $22,655 respectively, before living expenses and other applicable charges. The separate fee-based MEng uses a different price structure. Use the cost guide to build a budget around the actual MS schedule and any confirmed support. The national master’s ranking, methodology and Connecticut bachelor’s rankings cover related comparisons and undergraduate preparation.
Questions, answered
What else should you know?
Which electrical engineering master’s programs in Connecticut are reviewed?+
This page reviews UConn’s MS in Electrical Engineering at Storrs, including its Plan A research route and Plan B coursework route. The current catalog identifies the degree as in person.
Does UConn require publication for the electrical MS thesis route?+
Plan A requires an accepted full conference-proceedings paper by graduation. A journal paper can substitute. Students also complete the thesis, oral presentation and the other academic requirements.
Does the coursework route have a final examination?+
Yes. Plan B requires a comprehensive MS examination based on core coursework, along with its graduate-credit and seminar requirements.
What current price should a UConn electrical MS applicant use?+
The Storrs MS uses the traditional graduate tuition and mandatory-fee schedule. At nine or more credits, the 2026–27 semester subtotals are $11,699 for residents and $22,655 for nonresidents, before additional personal or applicable charges.
Continue your graduate research
Read the degree requirements behind each ranking
Use the school reviews to check how each program structures coursework, projects and research. Our methodology explains how we select programs and assess their fit.
