Best Electrical Engineering Degree Programs in Georgia in 2026
Georgia Tech, Kennesaw State and Georgia Southern give prospective electrical engineers three different undergraduate plans to examine. Our 2026 ranking of electrical engineering degree programs in Georgia reviews these named bachelor’s degrees through their electrical foundations, laboratory requirements, design experiences and practical enrollment conditions. The selection includes Atlanta, Marietta and Statesboro, so campus location belongs in the decision alongside the curriculum.
Start by separating required exposure from optional specialization. Kennesaw State and Georgia Southern both place electric machines in their core. Georgia Southern also requires power systems fundamentals, while Kennesaw leaves a larger defined elective block. Georgia Tech offers a broad electrical curriculum with its own specialization structure. A promising school is one where your preferred subject has a credible course and project path.
Electrical Engineering bachelor’s rankings by state+
Jump to a program +
Inside this ranking
How we ranked electrical engineering bachelor’s programs in Georgia
This selected ranking includes three individually reviewed Georgia institutions. Each offers an electrical engineering bachelor’s degree. The reviews address their campus undergraduate routes; the list does not rank graduate research groups or every engineering-related qualification offered in the state.
Georgia Tech leads for the breadth of the electrical curriculum documented in its national review. Kennesaw State follows for its balanced electrical core, 15-credit elective structure and two-course senior design sequence. Georgia Southern adds a distinctive required combination of machines, power, controls and laboratory work. This order reflects the reviewed degree plans and editorial judgment.
Tuition for two semesters. Annual tuition is $34,604 for out-of-state students and $35,610 for out-of-country students. Mandatory fees are additional: $1,516 for the domestic categories or $1,716 for the out-of-country category. Housing, meals, materials and personal expenses are separate.
Georgia Tech’s BS connects a broad electrical engineering curriculum with optional work, research and international study. Analysis and design run through the degree and culminate in a major design experience that considers economic and societal issues as well as technical performance. Electrical engineering electives extend from analog electronics and control systems to photonics, energy and telecommunications. The catalog also describes a cooperative education plan with alternating academic and paid work terms, a Research Option, and an International Plan. These are defined undergraduate pathways, rather than a general promise that students can gain experience.
Where it stands out
This is a useful choice if you want to keep several specialties open while building a substantial experience alongside coursework. The ability to combine co-op, research and international designations makes the program particularly interesting for students who plan their degree actively.
What to weigh
Co-op changes the study calendar: work terms alternate with campus terms. Research and international options also require deliberate planning. Treat them as choices to organize with the school, not experiences automatically included with admission.
Fall 2026 through Summer 2027 undergraduate tuition: Georgia residents $192 per credit, domestic nonresidents $722 and nonresident international students $743. The published 15-credit semester tuition is $2,880, $10,830 or $11,145 respectively, plus $594 in student fees. Applicable course charges and living expenses are additional.
Kennesaw State offers a broad electrical engineering curriculum with a particularly clear progression from circuit analysis and semiconductor devices into electric machines, embedded systems and controls. The 124-credit catalog places Senior Design Project I and II after that foundation. Its elective rules also show how a student can combine additional EE work with mathematics or engineering science, including approved computer engineering subjects such as FPGA design and sensors. For applicants comparing engineering with engineering technology, the exact qualification matters: this reviewed route is the Bachelor of Science in Electrical Engineering, accredited by ABET’s Engineering Accreditation Commission.
Where it stands out
Kennesaw State is worth considering if you want required exposure to both electronic hardware and electrical machines before choosing advanced courses. The Marietta engineering setting and two-course senior project make the curriculum useful to evaluate through actual laboratory and design interests.
What to weigh
Admission to the university is only the first step in the course sequence: Engineering Standing governs access to upper-division engineering classes. The elective block also has separate subject requirements, so it cannot all be assigned to one favorite specialty. Budget mandatory student fees alongside the residency-based tuition rate.
Use the Fall 2026 and Spring 2027 Statesboro undergraduate schedules linked by the bursar. Charges depend on residency, credit load, campus and course-specific fees; housing and meal choices are separate. Online or mixed online/off-campus enrollment can carry an Online Learning Fee. The registration invoice in WINGS determines actual charges.
Georgia Southern makes power and control visible in the required electrical engineering curriculum. Electric machines, power systems fundamentals and control systems sit alongside microcontrollers, microelectronics, communications and electromagnetics. Many of these courses include laboratory work, so the breadth extends beyond a list of lecture topics. The current 2026–27 catalog requires 123 credits and a four-credit senior capstone; that catalog total is the basis of this review. Its six-credit major elective block then offers focused subjects ranging from smart grids and electric vehicles to robotics, electronic warfare and wireless communications.
Where it stands out
Georgia Southern is a useful option for students who want electrical power and machines included in the core while retaining exposure to embedded and communication systems. Review the Statesboro laboratory courses and capstone alongside the small set of electives you would most want to take.
What to weigh
The catalog’s six major elective credits make prioritization important if several advanced areas interest you. Students beginning the first two years at Armstrong need a plan for completing the Statesboro degree. Tuition and mandatory fees depend on campus, residency and registration, while course-specific charges may add to the bill.
Attendance:The reviewed degree is based in Statesboro. The university also describes the first two years at Armstrong; that does not establish a complete Armstrong-campus degree.
The 2026–27 catalog requires circuits, microcontrollers, microelectronics, electric machines, power systems fundamentals, control and communication systems.
Several required engineering courses include laboratories, including signal processing, machines, circuits, controls and communications.
Six major elective credits can draw from subjects such as electric vehicles, power electronics, smart grids, robotics, electronic warfare and wireless communications.
Admission & progression
Applicants follow Georgia Southern’s undergraduate admission process; transfer applicants have their prior coursework reviewed for the selected major.
Students must earn C or better in all ENGR and EENG courses and meet their assigned academic advisor at least once each semester.
Design & practical experience
A four-credit Electrical and Computer Engineering Senior Capstone Design course is required.
The catalog encourages internships, co-operative education and faculty-led research; professional experience and directed study appear among approved elective choices.
What matters in electrical engineering bachelor’s programs in Georgia
Required technical range
We look for the electrical subjects students actually complete, including circuits, devices, signals, computing, machines and electromagnetic systems.
Design and laboratory work
A named senior project and identified laboratory courses give more useful evidence than a broad promise of hands-on learning.
A workable enrollment plan
Campus, progression into upper-level courses and the tuition rules need to fit the student’s starting preparation and budget.
What separates these electrical engineering degree programs in Georgia?
Kennesaw State’s current catalog requires hardware programming, circuit analysis, semiconductor devices and digital logic before advanced electronics, embedded systems, machines and controls. Its 15 elective credits have separate electrical, mathematical and technical requirements. Students considering embedded hardware can examine approved choices such as FPGA design and sensors, then work backward through prerequisites.
Georgia Southern’s 2026–27 BSEE requires 123 credits. Electric machines, power systems fundamentals, controls and communications all appear in the core, often with laboratories. The six major elective credits call for an early decision: a student interested in power electronics, robotics and wireless communication cannot assume every interest will fit into that small block. This is a particularly useful comparison for someone who wants power in the required foundation.
Use projects and campus location to narrow the list
Kennesaw State requires Senior Design Project I and II. Georgia Southern uses a four-credit Electrical and Computer Engineering Senior Capstone Design course. Ask each department about the preparation expected before the project, how teams are formed, and which facilities students use to test their work. A project’s place in the curriculum tells you how much prior coursework feeds into it.
Georgia Southern identifies Statesboro as the degree location. Its program overview also offers the first two years at Armstrong; students considering that starting point need to plan the eventual move into the Statesboro degree. Kennesaw’s electrical engineering program is based in Marietta. Compare the actual engineering campus and commuting arrangements, rather than relying on the city in a university’s name.
Plan upper-division entry and a semester budget
Kennesaw State opens the program to students who meet general university admission standards, but upper-division engineering courses require Engineering Standing. Georgia Southern requires C or better in ENGR and EENG courses and advising each semester. These conditions should influence the order of your first mathematics, science and engineering courses, particularly when transfer credit changes the usual sequence.
Kennesaw’s 2026–27 rates separate Georgia resident, domestic nonresident and nonresident international tuition, with mandatory student fees added. Georgia Southern’s bursar schedules separate campus, term and residency categories. Use the same number of credits and the same living arrangement when comparing the resulting budgets. Our engineering degree cost guide explains how to include fees and aid in that calculation.
Questions, answered
What else should you know?
Which Georgia programs are reviewed here?+
The selected bachelor’s ranking includes Georgia Tech, Kennesaw State and Georgia Southern. The reviews focus on the electrical engineering qualification at each institution and the campus routes described in the individual cards.
Does Georgia Southern offer the whole BSEE at Armstrong?+
The university describes the first two years at Armstrong, while the current BSEE catalog identifies Statesboro as the degree location. Plan the complete course sequence and campus transition before choosing Armstrong as a starting point.
Which programs require electrical machines?+
Kennesaw State and Georgia Southern both include electric machines in their required electrical curricula. Georgia Southern also requires power systems fundamentals. Electives and project choices determine how much further a student develops that power-related foundation.
Does admission at Kennesaw guarantee access to advanced EE courses?+
The catalog distinguishes general admission from Engineering Standing, which is required for upper-division engineering courses. Use the electrical program’s advising process to establish the required preparation before planning advanced registration.
Keep researching
Choosing a electrical engineering degree
Learn what an electrical engineering degree covers, including circuits, signals, lab work and design, plus admissions, transfer and online study.
