Best Electrical Engineering Degree Programs in Missouri in 2026
A required power laboratory and a required instrumentation course provide two useful starting points for comparing electrical engineering degree programs in Missouri. Missouri S&T builds an approved power lecture/laboratory pair into its degree. Mizzou places measurement and instrumentation in the electrical core and gives the first senior capstone course a writing-intensive designation.
Our 2026 ranking reviews the campus electrical bachelor’s degrees in Rolla and Columbia. Both offer several advanced electrical directions, but their elective rules and tuition systems deserve close reading. The program profiles focus on the standalone electrical awards, with separate degree plans needed for any combined electrical and computer engineering route.
Electrical Engineering bachelor’s rankings by state+
Jump to a program +
Inside this ranking
How we ranked electrical engineering bachelor’s programs in Missouri
This selected ranking includes two individually researched Missouri institutions. Each review uses official electrical degree requirements and current undergraduate tuition evidence. The list evaluates these named bachelor’s programs, rather than ranking graduate laboratories or treating every electrical-related major in Missouri as interchangeable.
Missouri S&T leads for its required power laboratory pairing, specified advanced elective categories and a senior project that explicitly includes product design, implementation and testing. Mizzou follows for required measurement and instrumentation, technical-writing work in capstone and a broad set of advanced electrical subject areas. The order reflects those reviewed undergraduate distinctions.
For fall 2026 and spring 2027, Electrical Engineering is listed in Rate 3: $9,747 resident tuition or $19,718 nonresident tuition per semester at 12–18 credits. Activity/facility fees add $42 per credit capped at 12 credits, and the health-service fee is $223.59 per semester. Enrollment above 18 adds the applicable per-credit tuition; academic testing and other applicable charges and living expenses are separate.
Missouri S&T’s electrical degree combines a broad set of advanced subject areas with detailed laboratory and elective rules. The 128-credit BS requires an approved power lecture/laboratory pair and a two-course senior project. In that project, small teams complete a design cycle that includes documentation, analysis, prototyping, implementation and testing, with design reviews and professional standards included. Students can pursue several electrical areas or an optional emphasis, but the elective categories constrain which courses count. This makes the program useful to evaluate through a proposed specialty and project plan rather than treating its long advanced-course list as unrestricted choice.
Where it stands out
Missouri S&T suits students who want to connect electrical depth with a clearly described product-design and testing process. The required power lecture/laboratory pairing is also useful for applicants seeking practical energy-related study within a degree that retains communications, electronics and other electrical options.
What to weigh
The elective categories and optional emphases impose different restrictions, while minimum prerequisite grades govern access to later work. Lecture and corequisite laboratory enrollment are linked. Electrical Engineering uses the university’s Rate 3 tuition category, with mandatory fees and other applicable charges beyond the 12–18-credit tuition plateau.
The 128-credit degree permits advanced work across circuits/electronics, power/energy, communications/signals, controls, electromagnetics, optics/devices and computer engineering.
A required power elective is completed as one of the approved lecture/laboratory pairs.
Electrical elective categories and optional emphasis areas have specific course-level and subject restrictions, with six free elective credits under separate approval rules.
Admission & progression
Freshman applicants can use the test-optional application process; the current fall 2027 guidance notes that applicants below a 3.2 core GPA may need additional supporting academic documents.
The curriculum requires C or better in the specified mathematics, physics, electrical and computing prerequisites before related later courses.
Degree requirements include at least a 2.0 overall GPA and a 2.0 GPA in electrical engineering coursework.
Design & practical experience
Electrical Engineering Senior Project I and II form the required culminating sequence.
The senior project asks small teams to design, document, analyze, implement and test a product, with attention to prototypes, design reviews, ethics and standards.
Students select an approved power lecture and its corresponding laboratory; the catalog links withdrawal from a lecture with its corequisite lab.
$9,516.80 resident electrical tuition per semester
Cost basis & conditions +
The official calculator was set to Fall 2026 / Spring 2027, On campus, 15 credits and Electrical Engineering - BSEE. Tuition for the 12–18-credit plateau is $9,516.80 for Missouri residents or $21,097.50 for nonresidents; the selected mandatory fees total $628 per semester. The displayed per-credit tuition is $793.40 resident or $1,758.80 nonresident for applicable part-time/overload billing. Other applicable charges and living expenses are separate.
Mizzou’s electrical BSEE puts measurement and instrumentation beside circuits, microprocessors, signals, fields and semiconductor devices in the required plan. Students complete two senior capstone courses, with the first designated writing intensive, and select a senior electrical lecture/laboratory course. The university describes several areas for focused study, including energy and power electronics, communications, robotics and control, while explicitly stating that those areas are not transcript or diploma designations. This review addresses the standalone electrical degree. Applicants should use its degree audit and elective rules when planning completion, especially if considering the separately published computer-engineering dual-degree route.
Where it stands out
Mizzou is worth investigating if you want measurement and instrumentation in the required electrical core and a senior project that formally includes technical writing. Its focused subject areas can help organize an elective discussion without requiring the applicant to treat an informal focus as an additional credential.
What to weigh
The listed focus areas do not appear on transcripts or diplomas, and the combined electrical/computer-engineering route has separate requirements. Transfer students must satisfy upper-level residence rules as well as course equivalencies. Tuition depends on the primary academic plan, with a 12–18-credit plateau and additional per-credit charges above it.
The standalone electrical requirements include circuit theory, microprocessor engineering, signals and linear systems, electronic circuits, fields, semiconductors/devices and measurement/instrumentation.
The plan includes a senior electrical lecture/laboratory choice and advanced ECE technical electives.
The university describes focus areas in communications, digital systems, electronics, electromagnetics, energy/power electronics, robotics and control; these focus areas are not recorded on transcripts or diplomas.
Admission & progression
Applicants to the electrical BS must meet MU’s General Admission Standard. Engineering expects the specified high-school preparation, including four mathematics units and three laboratory-science units.
Transfer students following an approved articulation agreement can enter their intended program after completing that agreement’s requirements; other transfers receive a transcript-based program review.
Transfer degree completion requires the college’s upper-level residence credits, including the specified amount of department-approved engineering coursework.
Design & practical experience
Senior Capstone Design I and II form a required six-credit sequence; the first course is designated writing intensive.
A senior lecture/laboratory elective complements the required measurement and instrumentation course.
What matters in electrical engineering bachelor’s programs in Missouri
Practical requirements
A required laboratory, instrumentation course or documented project process shows what students must complete before graduation.
Accurate specialization claims
We separate formal degree requirements from optional emphases and informal focus areas.
Program-specific tuition
Both institutions use tuition categories tied to the academic plan, so the electrical degree must be selected when building a budget.
Electrical laboratories and senior projects in Missouri
Missouri S&T’s electrical catalog requires a power lecture with its corresponding laboratory and a two-course senior project. The project description asks small teams to design, document, analyze, implement and test a product, including prototypes, reviews and professional standards. The 128-credit degree divides advanced electrical electives into categories; choosing an optional emphasis changes which courses can fill some of those categories.
Mizzou’s BSEE requirements place measurement and instrumentation alongside circuit theory, microprocessors, signals, electronic circuits, electromagnetic fields and devices. Senior Capstone Design I and II form a six-credit sequence, with the first course designated writing intensive. A senior lecture/laboratory choice adds another practical component. Students who want to connect testing hardware with technical documentation can examine those required courses together.
What an electrical focus area means
Mizzou describes areas such as energy and power electronics, communications, digital systems, robotics and control. Its catalog explicitly says the focus areas do not appear on transcripts or diplomas. They can organize an elective conversation without becoming an additional credential. The separate combined electrical/computer-engineering route also has its own requirements; use the standalone BSEE audit when that is the award you intend to complete.
At Missouri S&T, the electrical elective groups impose course-level and subject restrictions, while six free elective credits have separate rules. Required prerequisite courses need the specified minimum grades before later enrollment. A long list of electrical courses is therefore a starting point for planning, not a promise that every combination will satisfy the degree. Review the intended emphasis, laboratory pairing and senior-project timing together.
Entry requirements and electrical tuition in Missouri
Missouri S&T’s current freshman guidance offers a test-optional route, with additional academic documents potentially required below its stated core-GPA threshold. Mizzou applies its General Admission Standard to the electrical BS and describes transfer admission through completed articulation agreements or individual transcript review. Transfer applicants should also verify upper-level residence requirements, since accepted prior courses do not remove the need to complete specified university engineering credits.
Missouri S&T’s Fall 2026/Spring 2027 schedule places Electrical Engineering in Rate 3: $9,747 resident or $19,718 nonresident tuition per semester at 12–18 credits. Activity/facility and health-service fees are additional. Mizzou’s official tuition calculator was checked for the electrical BSEE, campus attendance and 15 credits in the same academic year: tuition is $9,516.80 resident or $21,097.50 nonresident, plus $628 in the selected mandatory fees. These are term charges before aid and living expenses, and both plateaus have separate overload rules.
Questions, answered
What else should you know?
Which reviewed Missouri electrical degree requires a power laboratory?+
Missouri S&T requires one of the approved power lecture/laboratory pairs. The lecture and corresponding laboratory have linked enrollment rules, so students should schedule them together.
Are Mizzou’s electrical focus areas listed on the diploma?+
No. The BSEE catalog says its focus areas are not recorded on transcripts or diplomas. They describe ways to organize advanced study within the electrical degree.
Does Mizzou require technical writing in electrical capstone?+
Senior Capstone Design I is designated writing intensive in the electrical plan. It precedes Senior Capstone Design II as part of the required six-credit sequence.
Do these Missouri universities charge the same tuition for every major?+
Their published pricing depends on the academic plan. Missouri S&T assigns electrical engineering to Rate 3, while Mizzou’s calculator asks for the college and exact degree. Residency, enrolled credits, fees and overload charges also affect the bill.
Keep researching
Choosing a electrical engineering degree
Learn what an electrical engineering degree covers, including circuits, signals, lab work and design, plus admissions, transfer and online study.
